9718


B9718: 2023.08.21.9718

If RINEX2.x is selected with BDS enabled, a warning is displayed offering to disable BDS.

If RINEX2.x is selected and GPS is disabled, a warning is displayed offering to enable GPS.


B9717: 2023.08.16.9717

Switched to CHCData version 2.1.251.1390. 

Extended TEQC to BeiDou - 65 SV's: '-n_Beidou 65' when generating RINEX2. The latest iG5's have updated UniCorecom firmware that tracks and exports C43, C44. We expect that C62 will become operational soon. BeiDou PRN's higher than 65 will need to be dealt with at a later time.

Switched to RINEX3.05. See https://files.igs.org/pub/data/format/rinex305.pdf for a list of changes from RINEX3.04 to RINEX3.05.

Important Note: the number of BeiDou SV's continues to rise. There is now (August 2023) a PRN C62 in-orbit, being tested. TEQC tosses a warning of 'unintended consequences' when the maximum number of BeiDou is set to 65. This version of iGx allows submission of RINEX2 files to OPUS with BeiDou SV's included, however it is STRONGLY recommended that RINEX3 be used for submitting files to OPUS. It is probably prudent to just ALWAYS use RINEX3 unless the external tool won't accept 3.05. 

The QC button uses TEQC RINEX2 files and we (iGage) are very accustomed to looking at TEQC QC files. So, for the near future RINEX2 will continue to be supported.

CHCData supports writing 3.04 and other depreciated versions of RINEX3. No automatic provision is made by iGx for supporting them, however it is possible to manually change the RINEX3 convertor output to other versions.



B9715: 2023.08.15.9715

Updated CHCData to version 2.1.251.1327 dated 8/16/2023. Required for latest iG5 version.



B9714: 2023.03.10.9714

Added 'load Nevada Geodetic Library link' for selected station in the nearby CORS viewer.



B9713: 2023.02.17.9713

Fixed 'Use GAL' checkbox persistence.

Added load NGS Webpage, Short-Term Plot and Availability to right-click menu of station list.



B97012: 2023.01.12.9712

Fixed bad XYZ ECEF Position trap.



B97011: 2023.01.17.9711

Coordinate editing for the observation position added.

Fixed issue with unknown file locations.

Cleaned tab orders on new interfaces.



B97010: 2023.01.16.9710

Added Use and Exclude functionality with a built in tool that sorts NGS CORS stations by distance to the selected observation file. The Use/Exclude lists are automatically entered on the NGS OPUS Submission webpage and pushed to OPUS_Upload if the OU selection is made.

The Approximate Position from the RINEX file is now displayed in the observation grid in Advanced and Expert modes. 

Some small bugs which prevented rebuilding the RINEX files from the HCN source were fixed.

Some small formatting changes were made.


... See complete iGx_versions.html for a complete list of changes ...