Changes in 20240807

1. Nikon total station distance measurement was X10 distance.

2. Renamed Quick and Topo: Quick in Map survey is changed to Quick topographic

3. Point stakeout, the information panel azimuth was displayed when project configuration was set to Bearing.

4. In stakeout settings: “Remove staked points from list after staking” changed to “Remove staked points from point list after staking

5. Offset survey, Offset stakeout, Distance: changed to ‘From start point’.

6. In base station settings HCN, Close in Rinex options is changed to Disable. Open is changed to Enable.

7. Geomax Zoom95: software crashes on connection addressed.

8. When starting the base station from a Known point, if a manual base station point is selected and this point has a base station translation, the coordinates brought over were the ‘before the base station translation’. Changed to the translated (shifted) base station coordinates.

9. Inverse: select points from the Points library: it was not possible to select a Base station position. 

10. Quick point survey changed to Quick topographic point survey

11. When starting a Base from a known point, the ‘Save to the point library switch selection state is now remembered/persistent.

12. ‘Hide base-maps quickly’ toggle label changed to ‘Show base-maps quickly’. It was backwards before.

13. COGO: ‘intersection 2 points + 2 sides’ name changed to ‘Distance – Distance’.

14. I93 when connecting the instrument, with a known point start, the antenna was defaulting to I90. The antenna type is now synchronized.

15. New Base station working mode, ‘Known point’ switch now remembers the previous selection.

16. Single point calibration now selects the longitude and latitude point Local coordinates which may include a Base shift.

17. When searching points by point name, it was not possible to ‘Just enter a complete point number’ and select it. There is now an ‘Accept’ button on the keyboard so you don’t need to scroll through the possible matches to grab a point. This was very frustrating if you wanted to select point 1, and there were several hundred points in the range 1001 through 1999. You used to have to literally scroll through a thousand points to get to the 1 at the list bottom. Now you can just enter 1, then click accept.